Step 5

Remove the interior hood release lever by pulling the release cable out of the holder and removing the screw. Then pull the release lever out by prying on the plastic tab with a screw driver.

Partially remove the driver side lower panel on the left side so that you can pull it back enough to reach the EPS module and fish the wiring harness through.

PreviousStep 4 NextStep 6

Last updated 1 year ago

Remove the interior hood release lever by pulling the release cable out of the holder and removing the screw. Then pull the release lever out by prying on the plastic tab with a screw driver.

Partially remove the driver side lower panel on the left side so that you can pull it back enough to reach the EPS module and fish the wiring harness through.